 |
 |
 |
 |
|
 |
|
Features
BENEFITS
- Fingerprint function filters out other lasers that strike the receiver and only accept the laser that it is paired with
- No need to go “on-grade” to measure: saves considerable time
- Reduces rework by allowing remote monitoring
Increases reliability, accuracy and durability
- Accurate: All our models have different settings to suit your jobsite tolerances. The units of measure can be displayed in millimeters, centimeters, feet & inches and fractional inches.
COMMON FEATURES THROUGH THE WHOLE RANGE
- Accessories:
- Drop it in a puddle or get concrete on it, just wash it off with a hose
- In addition, the IP67 waterproof housing protects the unit from the harsh environment it is used in
- Designed to withstand a direct drop up to 10 feet* (3 meters) onto concrete meaning less downtime due to damage and service requirements (*Based upon models)
- Our laser receivers are the toughest on the planet!
- Rugged:
- Our clamps are designed to mount the receiver on any grade rods or even various sizes of wooden staffs
- All our clamps are covered by the same warranty as the laser receiver
- It is that good we back it up with an over-the-counter exchange policy for all warranty claims within the defined warranty period giving you peace of mind
- Reception Length:
- The longer the reception zone, the quicker you can acquire the laser beam allowing you to get your work done faster
- When used in vertical, a longer pick up zone allows more control when doing tilt-up or curtain walling
- Operating Time:
- Equipped with 2 AA batteries, all the models deliver long operating time to keep you working on the jobsite
- Easy:
- The laser receivers all include a display on the front and back for easy visual indication of detector status and grade information
- The display shows proportional arrows to help you find the on-grade position rapidly
- An adjustable audible tone indicates high, low and level
- All basic functions are a single press away
- Set your accuracy and loudness levels and get to work
HL PRODUCTS
- Unique Technology
- Our patented “Light Bar” technology has the following advantages:
- Longer reception length
- More granularity on the reception length
- Simplified design with more durable components rather than many fragile soldered components
- As a result, it delivers:
- Performance not affected by the beam diameter
- Consistent accuracy over the whole operating range
- Other forms of laser detection do not provide the consistency of the accuracy over distance meaning they are adding more error to the readout
- Unbeatable robustness enabling you to work in harshest conditions
ON ALL MODELS
- Longer Operating Time
- Forget to turn the receiver off when you have finished working? No problem! The automatic shut-off will take care of switching the unit off after a period of inactivity
- Digital Read-out
- With the digital readout models which have the prefix HL, you do not even need to get the receiver to the on-grade position because it displays how far from on-grade you are - allowing you to work faster and more accurately. You can quickly estimate how much material you need to cut or fill.
- Anti-strobe Sensor
- The patented anti-strobe filter eliminates false readings from LED lights that are commonly found on the job site such as vehicle hazard warning strobe lights
- Non “Light Bar” Technology
- Most receivers use an array of light detection cells with a very large number of fragile solder joints that result in laser detection errors and compromised reliability not well suited for the construction environment.
- “Light Bar” Technology
- With “light bar” technology, laser detection resolution is nearly infinite allowing greater accuracy and consistency
- Fewer electronic components and connections are used
- So “light bar” based products result in a more robust product, which is why we offer 5 foot and 10 foot drop specifications
- Unique Accessories
- The C70 clamp, with patented design, grips firmly to round, oval, square or rectangular rods
- The clamp can be mounted onto the receiver in the “standard” position - meaning the top of the clamp aligns to the on-grade position of the receiver
- The clamp position is automatically detected by the laser receiver
- Unique Functions:
- Capture
- The CAPTURE function can take grade readings remotely in situations in which the receiver is out-of-reach
- For example, when in a deep trench, you can press the capture button, the receiver will “capture” and save the reading
- Out of Beam Indication The display indicates which way to move the receiver to find the laser
- Unique Display
- The extra large LCD displays on both front and back are easy to read
- They display elevation, settings and status
- The 21 position arrow display provides quick intuitive graphical reference
- Some models also provide super bright LED indications which, along with the beeper, can be recognized from a distance
- Offset On-Grade Clamp Position
- Alternatively the clamp can be mounted to the receiver in the off-set position which is automatically detected by the receiver
- The offset clamp position moves the on-grade location to allow more grade information to be displayed above grade
- This is useful in applications where going below grade is not required, i.e. driving stakes down to grade
SPECIFIC FEATURES DEDICATED TO SPECTRA PRECISION ROTATING LASERS
- RADIO Function
- Choose a model with radio built-in and you will be able to control your rotating laser to enable advanced features such as GradeMatch, Axis Alignment, PlaneLok and Automatic Vertical Alignment
- FINGERPRINT Function
- Be even more secure with the unique FINGERPRINT function (only available on HL760 when paired with a Spectra Precision laser that has this function)
- Once paired, the receiver will reject laser strikes from other lasers on the jobsite that it is not paired with
- Thus it eliminates the errors caused by picking the wrong laser beam
|
|
|
|
|
|
|