Skip to content
Toggle mobile menu
SHOP BY BRAND
RITE IN THE RAIN
SHOP BY CATEGORY
DRONES & UAV
TRANSITS & THEODOLITES
BAGS & CASES
HUBS, TACKS & NAILS
PRISM POLE ACCESSORIES
RODS, BIPODS & TRIPODS
TRIPODS & TRIPOD ACCESSORIES
GAS MONITORING ACCESSORIES
SIGNS & FLAGS
CRADLES, CLAMPS & BRACKETS
SALES & PROMOTIONS
RADIO & RADIO ACCESSORIES CLEARANCE
USED CASE SALE
SEMINARS & TRAINING
SERVICE & REPAIRS
JOBSITE EQUIPMENT & SUPPLIES
Happy New Year! All showroom locations are closing at 3:00pm today, 12/31/2019, and will be closed on 1/1/2020.
Nav Menu 2
Nav Menu 3
Nav Menu 4
Nav Menu 5
Nav Menu 6
Nav Menu 7
Nav Menu 8
SHOP BY CATEGORY
Spectra Precision DG813 Pipe Laser
Special Order Item
Email for Order Instructions
Benefitting from the latest technology developed by Spectra Precision®, the DG813 delivers unprecedented performance when laying pipes.
The length of the DG813 has been reduced to make it easier to setup the lasers into tight inverts in the manhole. The DG813 has a grade range from -12% to +40% and is fully self-leveling over the entire grade range. Even the cross axis is fully compensated - providing quick setup and peace of mind that the laser will be level without having to adjust at the bottom of the invert.
The DG813 works over a distance of 150 m (500 ft) providing full operation in a single setup between manholes. The new RC803 remote control provides full function control and utilizes infra-red light in the pipe for up to 150 m (500 ft) control. For “over-the-top” setups, the remote utilizes radio communications up to a distance of 130 m (430 ft).
Flexible power options provide 40 hours operating time with NiMH rechargeable batteries and 50 hours with alkaline batteries. Alkaline batteries can be used directly at the laser without a separate battery pack. An additional car charger is available for work in remote areas.
Large graphical user interface can be seen easily when the laser is in a manhole. All functions are available via graphical menu which makes it simple and easy to use – no secret button pressing and short learning curve means it can be handed to anyone in your crew with little or no training. The same graphical user interface is used at the RC803 remote control.
The Spectra Precision® DG813 has advanced functions that make setting up and using it easier and more accurate:
Line-Set/Check allows the laser to shoot the beam upwards to align to the next manhole at the first day from a short, deep trench as the beam will move up to 100% in seconds.
Line scan allows the beam to sweep quickly (left and right) and can be stopped on the target using the remote control.
Line Alert is automatically activated once the grade and alignment are set warning the user that the setup has been disturbed, avoiding costly errors and re-work.
In addition, the DG813 comes with a smart Spot Finder SF803 which increases even further productivity. The laser can align automatically to the center of the Spot Finder, ideal for first day setup, and can also calculate the grade – great for checking previous work on a second day setup.
The DG813 has a bright beam moving quickly and accurately for alignment and grade. It can be easily spotted in the pipe and enhanced with the patented target that bends the beam upwards making it easy to see when looking down at the pipe reducing the need to bend down to see the beam when in the trench or standing above the trench.
Multiple attachments are available allowing the DG813 to be mounted in pipes of any size from 150 mm (6 in) upwards. A blower is also available to evenly circulate air through the pipe to avoid refraction of the beam inside the pipe.
Spectra Precision DG813
1/16 in at 100 ft
500' (150 m) Diameter
Self Leveling Range
Over the entire grade range with
automatic cross axis compensation
- 12% to + 40%
20° +/- 1°
5/8 x 11 horizontally
-20°C to 50°C
-4°F to 122°F
5.3 (diameter) x 9.8 (length) in
DG813, Pipe Centering Plate 1248, RC803 Remote Control, SF803 Spot Finder with Pole Adapter and Target Plate, Pipe Target 956 with 2 Plates, NiMH Rechargeable Battery Pack, Smart Charger, Carrying Case, Operating Manual.
New reduced length allows easy setup even in tight inverts
Large, bright, graphical user interface makes the screen easier to see and use when in or out of the pipe
Same graphical user interface can be seen on the remote – what you see on the laser you see on the remote
Self-leveling range of -12% to +40% over the entire grade range
Cross axis compensation provides a quicker more accurate setup as the laser does not have to be level in the pipe – place it in the pipe, it levels, you work
Bright visible beam that works up to 150 m (500 ft)
IP68 protection (dust and waterproof)
Flexible power options that provide 40 hours operating time (NiMH rechargeable batteries with worldwide charger) and 50 hours (alkaline batteries)
Alkaline batteries can be used directly in the laser without a separate battery pack
Additional car charger can be purchased to keep you working even when out in remote areas
Line-Set/Check: Allows the user to align the laser to the manhole quickly and easily to set direction
Will go up to 100% allowing easy alignment even in short trenches
Line Scan: Provides a quick alignment to the center of the target for the second day setup
Line Alert: Notifies the user if the setup is disturbed eliminating costly re-work from errors
RC803 remote works via radio 130 m (430 ft) or infra-red 150 m (500 ft) for both “Over the Top” set-up and in pipe/trench setup
With SF803 Spot Finder, Smart Functions are Available:
Spot Align: Automatically aligns the DG813 to the center of the Spot Finder in the pipe or to the direction of the manhole when used in a deep, short trench or for “Over the Top” setup
Spot Match: A great tool for checking that pipe has been installed to the correct grade or for finding the grade of existing pipe work. Can also be used to calculate the grade between manholes
SpotLok: Can be used to easily establish a steep slope reference at mountain areas or to lock the beam in a desired position for applications such as solar farms where the beam could be subject to drift
Spot Search: Can be used to manually locate the beam over long distances out of the trench when using the “Over the Top” application
Browse for more products in the same category as this item:
Topcon TP-L5B Red Beam Pipe Laser
Topcon TP-L5G Green Beam Pipe Laser Package
Topcon TP-L5GV Green Beam Pipe Laser
Spectra Precision DG613 Pipe Laser
Topcon TP-L5BG Green Beam Pipe Laser
Spectra Precision DG613G Green Beam Pipe Laser
Topcon TP-L5AV Red Beam Pipe Laser with Laser Plumb
Share your knowledge of this product.
Be the first to write a review »