Skip to content
Toggle mobile menu
Line and Point Lasers
Transits & Theodolites
Bags & Cases
Hubs, Tacks & Nails
Rods, Bipods & Tripods
Prism Pole Accessories
Gas Monitoring Accessories
Signs & Flags
Service & Repairs
Jobsite Equipment & Supplies
Seminars & Training
2019 New Year Sale
Nav Menu 2
Nav Menu 3
Nav Menu 4
Nav Menu 5
Nav Menu 6
Nav Menu 7
Nav Menu 8
Spectra Precision DG613
Quantity in Stock:100
In-stock items ship same day if ordered before 3pm
The Spectra Precision DG613 Pipe Laser is built for efficiency, accuracy and reliability when laying pipes.
The length of the DG613 has been reduced to make it easier to setup the lasers into tight inverts in the manhole. The DG613 has a grade range from -12% to +40% and is fully self-leveling over the entire grade range. Even the cross axis is fully compensated - providing quick setup and peace of mind that the laser will be level without having to adjust at the bottom of the invert.
The DG613 works over a distance of 150 m (500 ft) providing full operation in a single setup between manholes. The new RC803 remote control provides full function control and utilizes infra-red light in the pipe for up to 150 m (500 ft) control. For “over-the-top” setups, the remote utilizes radio communications up to a distance of 130 m (430 ft).
Flexible power options provide 40 hours operating time with NiMH rechargeable batteries and 50 hours with alkaline batteries. Alkaline batteries can be used directly at the laser without a separate battery pack. An additional car charger is available for work in remote areas.
Large graphical user interface can be seen easily when the laser is in a manhole. All functions are available via graphical menu which makes it simple and easy to use – no secret button pressing and short learning curve means it can be handed to anyone in your crew with little or no training. The same graphical user interface is used at the RC803 remote control.
Multiple attachments are available allowing the DG613 to be mounted in pipes of any size from 150 mm (6 in) upwards. A blower is also available to evenly circulate air through the pipe to avoid refraction of the beam inside the pipe.
DG613 â€“ 1st Day Setup Using Line Set Check
Spectra Precision DG613
1/16 in at 100 ft
500' (150 m) Diameter
Self Leveling Range
Over the entire grade range with
automatic cross axis compensation
- 12% to + 40%
20° +/- 1°
5/8 x 11 horizontally
-20°C to 50°C
-4°F to 122°F
5.3 (diameter) x 9.8 (length) in
Spectra DG613 Pipe Laser, RC803 Remote Control, 956 Pipe Target with 2 Plates, 1248 Centering Plate 200mm, Q104781 Charger, Q104667 NiMH Battery Pack, Multi Language CD, Quick User Guide and Safety Instructions and Hard Carrying Case.
New reduced length allows easy setup even in tight inverts
Large, bright, graphical user interface makes the screen easier to see and use when in or out of the pipe
Same graphical user interface can be seen on the remote – what you see on the laser you see on the remote
Self-leveling range of -12% to +40% over the entire grade range
Cross axis compensation provides a quicker more accurate setup as the laser does not have to be level in the pipe – place it in the pipe, it levels, you work
Bright visible beam that works up to 150 m (500 ft)
IP68 protection (dust and waterproof)
RC803 remote works via radio 130 m (430 ft) or infra-red 150 m (500 ft) for both “over-the-top” setup and in pipe/trench setup
Line-Set/Check: Allows the user to align the laser to the manhole quickly and easily to set direction
The beam will go up to 100% allowing easy alignment at the first day even in short trenches
Line Scan: Provides a quick alignment to the center of the target for the second day setup
Line Alert: Notifies the user if the setup is disturbed eliminating costly re-work from errors
Browse for more products in the same category as this item:
Spectra Precision DG613G
Topcon TP-L5 Series Pipe Laser
Spectra Precision DG813
Share your knowledge of this product.
Be the first to write a review »