Skip to content
Toggle mobile menu
Line and Point Lasers
Transits & Theodolites
Bags & Cases
Hubs, Tacks & Nails
Rods, Bipods & Tripods
Prism Pole Accessories
Tripods & Tripod Accessories
Gas Monitoring Accessories
Signs & Flags
Service & Repairs
Jobsite Equipment & Supplies
Seminars & Training
Nav Menu 2
Nav Menu 3
Nav Menu 4
Nav Menu 5
Nav Menu 6
Nav Menu 7
Nav Menu 8
Spectra Precision DG613G Pipe Laser
Quantity in Stock:5
In-stock items ship same day if ordered before 3pm
The Spectra Precision® DG613G Pipe Laser is built for efficiency, accuracy and reliability when laying pipes.
The length of the DG613G has been reduced to make it easier to set up the lasers into tight inverts in the manhole. The DG613G has a grade range from -12% to +40% and is fully self-leveling over the entire grade range. Even the cross axis is fully compensated - providing quick setup and peace of mind that the laser will be level without having to adjust at the bottom of the invert.
The DG613G works over a distance of 150 m (500 ft) providing full operation in a single setup between manholes. The new RC803 remote control provides full function control and utilizes infra-red light in the pipe for up to 150 m (500 ft) control. For “over-the-top” setups, the remote utilizes radio communications up to a distance of 130 m (430 ft).
Flexible power options provide 30 hours operating time with NiMH rechargeable batteries. Alkaline batteries can be used directly at the laser without a separate battery pack. An additional car charger is available for work in remote areas.
Large graphical user interface can be seen easily when the laser is in a manhole. All functions are available via graphical menu which makes it simple and easy to use – no secret button pressing and short learning curve means it can be handed to anyone in your crew with little or no training. The same graphical user interface is used at the RC803 remote control.
The Spectra Precision DG613G has advanced functions that make setting up and using it easier and more accurate:
Line-Set, check allows the laser to shoot the beam upwards to align to the next manhole from a short, deep trench as the beam will move up to 100% in seconds.
Line scan allows the beam to sweep quickly (left and right) and can be stopped on the target at the bulls-eye position using the remote control. Line Alert is automatically activated once the grade and alignment are set warning the user that the setup has been disturbed, avoiding costly errors and re-work.
The DG613G has a bright beam that can be easily spotted in the pipe and enhanced with the patented target that bends the beam upwards making it easy to see when looking down at the pipe reducing the need to bend down to see the beam when in the trench or standing above the trench. Multiple attachments are available allowing the DG613G to be mounted in pipes of any size from 150 mm (6 in) upwards. A blower is also available to evenly circulate air through the pipe to avoid refraction of the beam inside the pipe.
1/16 in at 100 ft
500' (150 m) Diameter
Self Leveling Range
Over the entire grade range with
automatic cross axis compensation
- 12% to + 40%
20° +/- 1°
5/8 x 11 horizontally
-20°C to 50°C
-4°F to 122°F
5.3 (diameter) x 9.8 (length) in
DG613G, Trivet Plate 1248, RC803 Remote Control,
Target Holder with two target plates,
NiMH Rechargeable Battery Pack,
New reduced length allows easy setup even in tight inverts
Large, bright, graphical user interface makes the screen easier to see and use when in or out of the pipe
Same graphical user interface can be seen on the remote – what you see on the laser you see on the remote
Self-leveling range of -12% to +40% over the entire grade range
Cross axis compensation provides a quicker more accurate setup as the laser does not have to be level in the pipe – place it in the pipe, it levels, you work
Bright visible beam that works up to 150 m (500 ft)
IP68 protection (dust and waterproof)
RC803 remote works via radio 130 m (430 ft) or infra-red 150 m (500 ft) for both “over-the-top” setup and in pipe/trench setup
Line-Set/Check: Allows the user to align the laser to the manhole quickly and easily to set direction
The beam will go up to 100% allowing easy alignment at the first day even in short trenches
Line Scan: Provides a quick alignment to the center of the target for the second day setup
Line Alert: Notifies user if setup is disturbed, eliminating costly re-work from errors
Browse for more products in the same category as this item:
Topcon TP-L5 Series Pipe Laser
Spectra Precision DG813
Spectra Precision DG613 Pipe Laser
Share your knowledge of this product.
Be the first to write a review »